INNER TUBE-145/70-6

585-5M-15 Belt for use with 24 tooth clutch sprockets Some Chuweng Raser or xcooter thunder THS Big Wheel scooters used this belt from factory with a 24 tooth trans sprocket. Reccomend 585-5m-15 belt if you are using a 24 tooth engine/trans 5m belt sprocket. The most common belt used for the left side or clutch belt with a 20 tooth engine sprocket and a 60 tooth shaft sprocket is a 575-5m-15. replacement of dry rotted twisted mis-shapen motor mounts can cause belt tension & alignment issues and incorrect length choice or misdiagnosis. your motor can be adjusted forward and backwards slightly to help with belt tension. we recommend replacing the motor mounts if the motor mounts are dry rotted or they stay twisted with the transmission belt removed.

6200 sealed bearing for wheels of gas and electric scooters

Eton Factory Scooter Air-Filter for use with (TK) primer bulb style carburator that has red push button choke. This filter does not fit rascal 40 Also not for use with Walbro H.P. carbs

Scooter Air Intake Aluminum Velocity Stack For smooth air flow and mounting H.P. Air Filters

Air Intake Insulator/Manifold To Cylinder Head Gasket

Carburetor Gasket Between Carb & Insulator/Manifold on scooter with TK factory carburetor.

Crankcase Gasket P/N 700102

e-ton Crankcase Half Magneto Side P/N 700101

Crankcase Half Pullstart Side p/n 700103

crankshaft bearing. left or right side. sold as each. order 2 for pair

P/n 700123 Eton 41.5cc Crankshaft Pullstart only non electric start For e-ton IXL 40 Rascal & scooters